SOBO Aquarium Fish Tank Submersible Water Pump WP-5000 60W

READY STOCK
*******************************************************
SOBO Aquarium Fish Tank Submersible Water Pump WP-5000 60W

Specifications:
power: 60W
voltage: 220-240V
Max Flow: 3000L/H
Max/H: 3m
Wire length:180cm
Size: 140*80*125mm

Package included:
1 * Set Water Pump

Completely submersible motor;

Extremely quiet operation;

Suction cups to fit any aquariums;

Suitable for fresh and sea water appliances;

Caution:

(1) For safety consideration, always disconnect from the electrical socket before performing maintenance.

(2) Always ensure the pump is submerged in water.

(3) Do not lift the pump unit by pulling the wire (Power Cord).

(4) The power supply cord provided for this appliance cannot be replaced. The pump cannot be used any more once any damage of the electric wire is found.

(6) This pump can only be used in fresh water or salt water, instead of any other kinds of liquids.

(7) The temperature of water in which this pump works should be between 0 to 35 degrees centigrade.

(8) The maximum depth in which this pump works is 1 meter.

Performance: A clogged or dirty intake screen will generally reduce the performance of the pump. Hence, you must wash away the surrounded debris frequently. If less flow is required, adjust the flow control lever.

Maintenance: Remove the front cover and the impeller cover, followed by the impeller unit. Use a small brush to clean the cylinder or just wash away the debris under running water.

Reminder: If the pump fails to operate, please check and ensure there is a consistent power supply to the pump unit.

Note: Performing regular maintenance can prolong the life span of the pump. During installation, ensure the power plug of the pump is inserted to the power socket outlet at the higher point. This is to ensure that water will not back flow via the wire to the socket outlet.